Hydraulic fast joint prevention leakage

In the hydraulic system, whether it is a metal pipe joint, or hydraulic hose manufacturers connectors, are prone to leakage problem. The sleeve type pipe joint, mostly because of pipeline subjected to external force or large impact force, the card sets loose or pipe end deformation caused by leakage, you should check the card sleeve is losing a round, cutting edge has no defect, tube end is intact and the card sleeve nut tightening degree, also eliminate the pipeline external force. The flared fitting, mostly because of the flaring over, does not meet the quality requirements or repeated disassembly, causing the flaring deformation or crack causing leakage, the front end truncated re expanding. If the use of male and female cone top pressure seal, the leakage is due mostly to the two conical surface is damaged, can be used for grinding the conical surface grinding.
In some "from" ring on end face or the outer diameter sealing occasions, the leakage reason has the following kinds: "from" ring aging or deformation caused by leakage; "from" ring assembly is not in place, the two plane connection pressure uneven or "from" ring was cut from causing leakage; "" ring not compacting, elastic deformation caused by lack of leakage; "from" ring rabbet groove deep caused leakage. In this regard, the need to re select the identical diameter and section of coarse "from" ring, can also be provided with a sealing plane rabbet groove cutting or grinding, in order to reduce the rabbet groove depth, so that the "from" ring have enough elastic deformation (compression in general should be between 0.35-0.65mm).
For the pipe joint oil resistant rubber, wool, mild steel board, combined sealing washer or sealant leak, whatever the material, should first check the seal is damaged, and the rough situation such as deformation, aging, and then take appropriate measures.

Hydraulic hose fitting are modern industrial piping in a high-quality flexible pipeline

Bellows hydraulic hose fitting is extremely thin-walled seamless or welded stainless steel pipe after all machining precision plastic molding. Since the elastic properties of the corrugated pipe determines the contour of the hose has good flexibility and fatigue resistance, it is easy to absorb the deformation of the movement cycle of the load, in particular the ability to compensate for the large amount of displacement in the pipeline system. It mainly consists of bellows, nets and connector components. Its inner tube is a thin spiral or circular stainless steel bellows, bellows outer nets, are made of stainless steel wire or woven according to certain parameters. Both ends of the hose connector or flange or flange joints with the metric hydraulic hose fittings  mating pipe. Bellows hose is extremely thin-walled seamless or welded stainless steel pipe after all machining precision plastic molding. Since the elastic properties of the corrugated pipe determines the contour of the hose has good flexibility and fatigue resistance, it is easy to absorb the deformation of the movement cycle of the load, in particular the ability to compensate for the large amount of displacement in the pipeline system. Hydraulic hose fitting made of zinc alloy die-casting, surface galvanized, matte or chrome; compact, non-porous, high strength. Metal hose connection hydraulic hose fitting, aesthetically pleasing; termination stainless steel hose fittings using standard stainless steel casting, stainless steel hose connector termination compact, non-porous, high strength, and stainless steel hose connected to a reliable, looks nice.Hydraulic hose fitting is a modern industrial piping in a high-quality flexible pipeline. It mainly consists of bellows, nets and connector components. Its inner tube is a thin spiral or circular stainless steel bellows, bellows outer nets, are made of stainless steel wire or woven according to certain parameters. Hydraulic hose fitting are modern industrial piping in a high-quality flexible pipeline. Its inner tube is a thin spiral or circular stainless steel bellows, bellows outer nets, are made of stainless steel wire or woven according to certain parameters. Both ends of the hose connector or flange or flange joints with the customer mating pipe.

Characteristics of corrugated metal hose

Because manufacturing hydraulic hose manufacturers main parts of data is the selection of austenitic stainless steel, thus guarantee the heat resistance and corrosion resistance excellent hose, hose assembly temperature scale is extremely wide, 600 degree for -196, using the hose on pipeline through medium corrosive select the application of stainless steel business scale, corrosion resistance can ensure the hose.
The selection of 1Cr18Ni9Ti 1 stainless steel metal hose of stainless steel materials, with strong corrosion ability.
The 2 tube body for thin wall stainless steel pipe hydraulic forming, has strong flexibility, scalability, twists and anti vibration ability, weaving nets set strengthen maintenance, so that it has higher bearing ability.
The interface between the 3 ends of the hose can be made into other connection methods in addition to standard thread, flange, convenient connection and use.
4 the product not only adapted to the rotary joint matching, and widely used in soft connecting various fluid medium delivery.

DKJ connector

The layout and characteristics: DKJ card type of flexible metal hydraulic hose adapters, steel and hose connections will no thread, save the threading process, only the screw is screwed into the can; metal joint is made of zinc alloy material by die casting, surface galvanized, frosted, or chrome plated; layout tight, high strength. Reliable, connection pipe and the metal hydraulic hose couplings surface is beautiful; the metal joint for sleeve type, stainless steel metal hose to the metal hose connection on the steel pipe is threaded metal hose; adaptation: JS type, JSH type, JSB type, JSHG type; adapting pipe: a thin steel wire tube, black and galvanized iron pipe (water, gas pipe); use DKJ card type metal joint note standard, scale steel hose connection.

Hydraulic fast joint prevention leakage

In the hydraulic system, whether it is a metal pipe joint, or hydraulic hose manufacturers connectors, are prone to leakage problem. The sleeve type pipe joint, mostly because of pipeline subjected to external force or large impact force, the card sets loose or pipe end deformation caused by leakage, you should check the card sleeve is losing a round, cutting edge has no defect, tube end is intact and the card sleeve nut tightening degree, also eliminate the pipeline external force. The flared fitting, mostly because of the flaring over, does not meet the quality requirements or repeated disassembly, causing the flaring deformation or crack causing leakage, the front end truncated re expanding. If the use of male and female cone top pressure seal, the leakage is due mostly to the two conical surface is damaged, can be used for grinding the conical surface grinding.
In some "from" ring on end face or the outer diameter sealing occasions, the leakage reason has the following kinds: "from" ring aging or deformation caused by leakage; "from" ring assembly is not in place, the two plane connection pressure uneven or "from" ring was cut from causing leakage; "" ring not compacting, elastic deformation caused by lack of leakage; "from" ring rabbet groove deep caused leakage. In this regard, the need to re select the identical diameter and section of coarse "from" ring, can also be provided with a sealing plane rabbet groove cutting or grinding, in order to reduce the rabbet groove depth, so that the "from" ring have enough elastic deformation (compression in general should be between 0.35-0.65mm).
For the pipe joint oil resistant rubber, wool, mild steel board, combined sealing washer or sealant leak, whatever the material, should first check the seal is damaged, and the rough situation such as deformation, aging, and then take appropriate measures.

JR-2 type rectangular metal hose joint rule selection

The selection of JR-2 type rectangular metal metric hydraulic hose fittings joint right is a very important project, good metal hydraulic hose couplings and joint not only can make you very worry, effort, but also more money.
Introduces the following selection of JR-2 type rectangular metal hose several criteria.
1, liquid type and temperature, according to the different liquid choose liquid species, temperature and body material metal hose.
2, the pressure of the liquid metal soft joint selection of key, so in for different pressure of the liquid must choose strong pressure resistance of the joint.
3 determine the installation size and shape after ordering products.
The different structure of 4 JR-2 type rectangular metal hose, used in different environment, combined with the environment temperature, humidity, and dust, to select the joint type, material of body and the sealing material etc..
Construction of 5 valve has two kinds, one kind is the automatic switch valve, is a one-way switch type, so in the choice according to the valve structure selection of different joint.

Metal hose connector

Metal hose connector types and models there are many. DPJ external thread termination metal hose connector is JB / GQ0552-83 D95-5 metal connector extension products. Metal fittings made of zinc alloy material

Metal hose connector types and models there are many.
DPJ external thread termination metal hydraulic hose assembly connector is JB / GQ0552-83 D95-5 metal connector extension products. Metal fittings made of zinc alloy die-casting, zinc plated, brushed, or chrome; compact, non-porous, high strength. Metal hose, reliable, beautiful appearance. This metal connector for termination type, metal hose used to connect to the line connector on the box. Adapter metal hose: JS type, JSH type, JSB type, JSHG type. Recommended use imperial or metric threaded metal hose connectors metal connectors.
DKJ card sets metal hose connector, can no threaded pipe and hose connections, save threading process, just to drive the screw into the can. Metal fittings made of zinc alloy die-casting, zinc plated, brushed, or chrome; compact, high strength. Steel and metal hose, reliable, beautiful appearance. The metal fittings for card sets for the metal hose is connected to the top of the steel pipe is not threaded. Adapter metal hose: JS type, JSH type, JSB type, JSHG type. Pipe Adapter: thin steel wire tube, black, galvanized iron pipes (water, gas pipes).
DGJ self solid metal hose connector, can not threaded or non-threaded pipe and outlet hose connection device, save threading process. Metal fittings made of zinc alloy die-casting, zinc plated, brushed, or chrome; compact, high strength. Steel and metal hose, reliable, beautiful appearance. This is self-hardening type metal joints for metal hose pipe on top of the non-threaded or non-threaded device and outlet. Adapter metal hose: JS type, JSH type, JSB type, JSHG type. Pipe Adapter: thin steel wire tube, black, galvanized iron pipes (water, gas pipes).
JSF-SPJ Jingsheng termination stainless steel hose fittings with standard stainless steel casting, stainless steel hose fittings termination JSF-SPJ tight structure, nonporous, high strength, and stainless steel hose connected to a reliable, looks nice; JSF -SPJ metal joints are Jingsheng Shanghai Electric JB / GQ0552-83 perform standard D96-4A, D95-5 metal connector extension products; JSF-SPJ stainless steel hose connector for termination type, stainless steel hose used to Jingsheng connected to the line connector on the box; JSF-SPJ Adapter metal hose: JSF-SJS type, JSF-SJSH type, JSF-SJSB type, JSF-JSHG type.