cleaning and installation considerations hydraulic hose fitting of

Hydraulic hose fitting, connecting parts and pressure tubing pressure tubing between. To ensure clean lubrication system and the supply line to the mechanical equipment clean and grease bearings must be installed to remove the pre-cleaning. Cleaning cleaning and pickling two kinds of kerosene. Will need to be cleaned to remove pipe and Hydraulic hose fittings  , pipe with a cloth (to afford yarn) James kerosene to wipe the tube ends and joints soaked in kerosene cleaning, hydraulic hose fitting coated with oil or grease filled, sealed at both ends and good to be installed; in the hydraulic hose fitting , whether it is a metal fitting, or the hose connector is prone to leakage problems. For card sets of pipe joints, mostly due to the hydraulic hose fittings by a larger force or impact, so that the card sleeve loose or pipe end surface deformation caused by leaks, you should check whether the card sets out of round, edge or without defects, whether the pipe ends in good condition and the extent of compression ferrule nut, but also eliminate the pipeline force. For flared fittings, mostly due to excessive flaring, substandard quality requirements or repeatedly demolished, resulting in flaring deformation or cracks caused by leaks, then you can be re-flared front truncated Installation Notes hose in mobile or stationary, and can not bend over, it can not bend at the root, the hydraulic hose fitting is moved to the extreme position when not pulled too tight, should be more relaxed.