hydraulic hose fitting,hose fittings,hydraulic adapters In the hydraulic system, both the metal pipe fitting, hose fitting, or are prone to leakage problems. deformation caused by leaks, you should check whether the card sets out of round, edge or without defects, whether the pipe ends in good condition and the extent of compression ferrule nut, but also eliminate the pipeline force.
2014年9月23日星期二
Hose fittings lntroduction and purpose
Stone pipes tubes together for four places; different two tubes of different diameters diameter pipe connected to the place. Steel hose fittings are pressure hose fittings . Depending on the process, divided into four categories, namely butt weld hose fittings category (points have no weld seam and two), socket welding and threaded hose fittings, flanges, pipe fittings. The effect of the hydraulic system is hose fitting by changing the pressure force. A complete hydraulic system consists of five parts, namely, power components, actuators, control components and auxiliary components (Annex) and hydraulic oil. Hydraulic hose fittings are connected to the pipe line parts. Depending on the connection method can be divided into socket type fittings, threaded hose fittings, flanges and welded pipe fittings four categories. Multi-tube made of the same material. There elbows (elbows), flanges, tees, crosses tube (Phillips) and diameter pipe (size of the head) and so on. Place for pipe elbow turn; flange for tube and pipe interconnected parts, connected to the pipe end, tee pipe together for three places;
订阅:
博文评论 (Atom)
没有评论:
发表评论