a fluid coupling mounting and dismounting

Couplings should be installed before the prime mover and the working machine shaft clean and apply grease. Not allowed when installing coupling plate or aluminum casing hammer beating , nor hot charging to avoid damage to seals and components . Cutter shaft in the work machine screw hole and screwed on the screw by rotating the screw cap nuts on Hydraulic adapters  coupling device on the screw shaft ( associated with coupling ) into balance , mounted on the device. Installation tool is optional , such as the need to purchase when ordering . Coupling the input and output aperture tolerances recommended that users specify when ordering to G7 tolerance , if not marked according H7 tolerance execution. Fluid coupling disassembly , the first floor of the original motor fastening bolts loose after about moving motor coupling half the separation , and then remove the hydraulic motor shaft thread Rama coupling halves , Finally, remove the screw screwed into the coupling spindle disassembly screw holes will remove the top of the coupling body , do not knock the couplings aluminum housing to be demolished . Removal tool is optional , such as the need to purchase when ordering . No prior contact with professional maintenance personnel shall not disassemble coupling body , precision and balance to avoid damage to seals and other problems , such as damage to the user disassemble solution will not warranty .